DESCRIPTION:
American WeatherStar (WeatherStar) TPO T-Joint Covers are made from a high performance non-reinforced TPO membrane. T-Joint Covers are specifically designed to seal T-joints that occur at seam intersections on TPO roofing systems.
PHYSICAL PROPERTIES:
American WeatherStar (WeatherStar) TPO T-Joint Covers are made from a high performance non-reinforced TPO membrane. T-Joint Covers are specifically designed to seal T-joints that occur at seam intersections on TPO roofing systems.
PHYSICAL PROPERTIES:
| PROPERTY | TEST METHOD | PHYSICAL PROPERTIES |
| Color | White, Grey & Tan | |
| Thickness,Nominal | ASTM D-751 | .050” ± .005”(1.25mm ± .125mm) |
| Tensile | ASTM D-412 | 1800 psi |
| Elongation | ASTM D-412 | 700% |
| Tearing Strength | ASTM D-624 | 350 lbf (158 Kgf) |
| Brittleness Point | ASTM D-1790 | -40ºF (-40ºC) |
INSTALLATION:
1. Application of WeatherStar TPO T-Joint Covers must be conducted in accordance with heat welding instructions per WeatherStar current TPO Technical Specifications.
2. Heat weld TPO T-Joint Covers over all TPO seam intersections to reduce the risk of water entry into the seam area. T-Joints should be centered over the T-joint intersection and welded to the existing membrane using approved heat welding techniques and equipment.
3. Aged or weathered TPO membranes will require additional cleaning with WeatherStar Cleaner in order to remove dirt or debris from the welding area.
4. Refer to the Product Data Sheet for WeatherStar Cleaner for additional information on the proper use and application of WeatherStar Cleaner.
PRODUCT DATA:
Membrane: TPO (Thermoplastic Olefin)
Color: White, Grey and Tan
Size: 4.5” (114.3 mm) Diameter Circle
Thickness: .050” (1.25 mm) +/- 10%
Quantity: 100 per carton
STORAGE:
• Store indoors in original unopened containers at temperatures between 60ºF (16ºC) and 80ºF (27ºC).
• Do not store in direct sunlight or at temperatures above 80ºF (27ºC).
• When exposed to lower temperatures, restore to room temperature prior to use.
PRECAUTIONARY DATA:
• Take care when moving, transporting, handling, etc. to avoid sources of punctures and physical damage.
• Refer to Material Safety Data Sheet.
AWS Home | Single-Ply | Contractors | Facility Managers | Architects | Coatings
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
1. Application of WeatherStar TPO T-Joint Covers must be conducted in accordance with heat welding instructions per WeatherStar current TPO Technical Specifications.
2. Heat weld TPO T-Joint Covers over all TPO seam intersections to reduce the risk of water entry into the seam area. T-Joints should be centered over the T-joint intersection and welded to the existing membrane using approved heat welding techniques and equipment.
3. Aged or weathered TPO membranes will require additional cleaning with WeatherStar Cleaner in order to remove dirt or debris from the welding area.
4. Refer to the Product Data Sheet for WeatherStar Cleaner for additional information on the proper use and application of WeatherStar Cleaner.
PRODUCT DATA:
Membrane: TPO (Thermoplastic Olefin)
Color: White, Grey and Tan
Size: 4.5” (114.3 mm) Diameter Circle
Thickness: .050” (1.25 mm) +/- 10%
Quantity: 100 per carton
STORAGE:
• Store indoors in original unopened containers at temperatures between 60ºF (16ºC) and 80ºF (27ºC).
• Do not store in direct sunlight or at temperatures above 80ºF (27ºC).
• When exposed to lower temperatures, restore to room temperature prior to use.
PRECAUTIONARY DATA:
• Take care when moving, transporting, handling, etc. to avoid sources of punctures and physical damage.
• Refer to Material Safety Data Sheet.
AWS Home | Single-Ply | Contractors | Facility Managers | Architects | Coatings
ENERGY STAR® | Products | Application Specs | Case Studies | Warranties
Photo Gallery | Site Map | Contact Us
All content Copyright © 2004-2008 American WeatherStar
