![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DESCRIPTION:
American WeatherStar (WeatherStar) TPO fleece-back membrane meets or exceeds all of the requirements for ASTM D 6878-03 Thermoplastic Polyolefin membrane. The fleece-back membrane is reinforced with a 9x9, 1000 denier polyester fabric. PHYSICAL PROPERTIES:
INSTALLATION: TPO fleece-back may be installed as a mechanically attached, a fully adhered, or a ballasted system. Please consult current WeatherStar TPO specifications for specific application needs. PREPARATION OF SUBSTRATES: Substrates must be clean, dry, smooth, and free of sharp edges, fins, loose or foreign materials, oil, grease, or other materials which may damage the membrane. All rough surfaces which could damage the membrane shall be repaired as specified to offer a smooth substrate. All surface voids greater than 1/4” (6.35 mm) wide shall be properly filled with an acceptable material. STORAGE: Store in original, unopened packaging and away from sources of punctures and physical damage. Assure that structural decking will support the loads incurred by the material stored on roof top. The deck load limitations should be specified by the project designer. SHELF LIFE: Not applicable PRECAUTIONARY DATA: To avoid sources of punctures and physical damage, take care when moving, transporting, or handling. AWS Home | Single-Ply | Contractors | Facility Managers | Architects | Coatings ENERGY STAR® | Products | Application Specs | Case Studies | Warranties Photo Gallery | Site Map | Contact Us All content Copyright © 2004-2008 American WeatherStar |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||